ModMaster Manual v3.10 - 4.2. File Register Table

Download manual: PDF HTML

4.2. File Register Table

Details of all defined file registers are displayed in the File Register Table.

See the section Defining file registers for explanations of the values displayed in each column.

You can select which columns are displayed in the table using the ViewFile Columns menu item.

4.2.1. Editing file register definitions

A field of a file register can be edited in the File Register Table by clicking on the field (or moving to it with the keyboard) and then entering/selecting the new value. The Type of a register may only be changed when ModMaster is stopped (i.e. click the Run button if necessary).

Alternatively, a register may edited using the Edit File Register page. Use the File and Register drop-down lists to select the register to be edited, change the values as required, and click Apply to save the changes.

4.2.2. Deleting file register definitions

To delete a file register, select it by clicking on its address in the File Register Table (or moving to it using the keyboard), and then click the Delete button.

To delete several registers, select them by clicking on their addresses while holding down the control key, and then click the Delete button.

To delete all the file registers in the displayed file, click the Delete File button.

To delete all the file registers in all files, click the Delete Files button.

You can delete file registers only when ModMaster is stopped (i.e. click the Run button if necessary).