Wingpath to cease trading on 25 October 2025

From 25 October 2025 we will no longer be selling licences for our software products (ModSnmp, ModMultiSim, Modsak, ModSlaveSim, ModMaster and ModTest).

The website will remain operational until at least 2027 for reference purposes, and for the registration and transfer of product licences.

ModSlaveSim help v3.07 - 3.2. Simulation: Edit Slave Settings

Download manual: HTML

Prev     Next
ModSlaveSim help v3.07 > Edit Settings... > Simulation: Edit Slave Settings

3.2. Simulation: Edit Slave Settings

3.2.1. Add Slave
3.2.2. Delete Slave
3.2.3. Map Addresses
3.2.3.1. Message addresses
3.2.3.2. Model addresses
3.2.3.3. Mapping message address to model address
3.2.4. Set 32/64-bit Values

This is where you add or remove a Modbus slave, or modify settings specific to the slave but common to all of a slave's registers. These settings are the mapping of addresses and the configuration of 32-64 bit values.

To navigate to these settings, type Ctrl-W to bring up the Edit Settings... dialog then with the Simulation tab selected, click on the appropriate subpanel title under Edit Slave Settings.

.
Prev  Up  Next
  Home