3.2. Simulation: Edit Slave Settings

3.2.1. Add Slave
3.2.2. Delete Slave
3.2.3. Map Addresses
3.2.3.1. Message addresses
3.2.3.2. Model addresses
3.2.3.3. Mapping message address to model address
3.2.4. Set 32/64-bit Values

This is where you add or remove a Modbus slave, or modify settings specific to the slave but common to all of a slave's registers. These settings are the mapping of addresses and the configuration of 32-64 bit values.

To navigate to these settings, type Ctrl-W to bring up the Edit Settings... dialog then with the Simulation tab selected, click on the appropriate subpanel title under Edit Slave Settings.

.