Figure 1. Main window

Figure 2. Configuration dialog

Figure 3. General settings panel

Figure 4. Interface to Slave panel

Figure 5. Interface to Slave serial settings

Figure 6. Address mapping panel

Figure 7. 32/64-bit Value Settings panel

Figure 8. Polling panel

Figure 9. Add Register panel

Figure 10. Register display

Figure 11. Edit Register panel

Figure 12. Define Command panel

Figure 13. Read Holding Registers panel

Figure 14. Custom Command panel

Figure 15. Send Raw Data panel

Figure 16. Commands panel

Figure 17. Edit Command panel

Figure 18. Trace window