Modsak Manual v3.10 - 3.2. Register Table
Details of all defined registers are displayed in the Register Table.
See the section Defining registers for explanations of the values displayed in each column.
You can select which columns are displayed in the table using the→ menu item.
A field of a register can be edited in the register table by clicking on the field (or moving to it with the keyboard) and then entering/selecting the new value. The Type of a register may only be changed when Modsak is stopped (i.e. click the button if necessary).
Alternatively, a register may edited using the Edit Register page. Use the Address drop-down list to select the register to be edited, change the values as required, and click Apply to save the changes.
To delete a register, select it by clicking on its address in the Register Table (or moving to it using the keyboard), and then click the Delete button.
To delete several registers, select them by clicking on their addresses while holding down the control key, and then click the Delete button.
To delete all the registers click the Delete All button.
You can delete registers only when Modsak is stopped (i.e. click thebutton if necessary).